• Accuracy up to 0.025% of FS (depends on range)
• 7 ranges available up to 15,000 psi (or equivalent): Choice of PSI, bar or Pa
• Integrated CPF Connection
• Rugged construction for rough field use
• Self-contained, intelligent module
• Calibration data stored inside the module
• Active temperature compensation
• 1/4 NPT, 1/4 BSP or M20 x 1.5 connections available

• Accuracy:
• 30, 100 and 300 psi; 3, 10 and 30 bar; 300 kPa, 1 and 3 MPa
• 0 to 30% of Range: ±(0.0075% of Full Scale)
• 30 to 110% of Range:  ±(0.025% of Reading)
• Vacuum: For 100 psi/10 bar/1 MPa and lower: ±(0.06% of Full Scale*); For 300 psi/30 bar/3 MPa: ±(0.06% of Full Scale*) ±1 LSD
• *Full Scale = -14.5 psi/-1.0 bar/-100.0 kPa
• 1000, 3000, 10 000, and 15 000 psi; 100, 300, 700, and 1000 bar; 10, 30, 70, and 100 MPa
  
• 0 to 30% of Range: ±(0.015% of Full Scale)
  
• 30 to 110% of Range: ±(0.05% of Reading)
• Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year.
  
• All models indicate vacuum, but vacuum specification applies only where specified.
• Not recommended for continuous use at high vacuum. Refer to XP2i-DP data sheet for gauges that are intended for continuous high vacuum use
• Sensor:
  
• Wetted Materials:  (wrench tight) 316 stainless steel (finger tight) 316 stainless steel and Viton® (internal o-ring)
• Diaphragm Seal Fluid:  Silicone Oil
• Connection: Crystal CPF Female
• All welded, with a permanently filled diaphragm seal.
• Metal to metal cone seal; O-ring can be removed if necessary.
• 1/4" male NPT adapter is included unless BSP, M20 or 15KPSI is specified.
• 1/4" medium pressure tube system is compatible with HIP LM4 and LF4 Series, Autoclave Engr SF250CX Male and Female Series.
• Output:
  
• Pressure Resolution: up to 6 digits
• Display Update:  up to 10 per second
• Pressure resolution is the maximum resolution available.
• The resolution of your JOFRA device may be different.
• Communication:
  
• Connector: 5-pin LEMO
• Serial: 9600 baud, 8 data, no parity, 1 stop
• Protocol: ASCII command language
• Pressure Overload:
  
• Overload Alarm:  “+OL” in display at 110% F.S
• Operating Temperature:
  
• Temperature Range: -20 to 50° C (-4 to 122° F)
• < 95% RH, non-condensing. No change in accuracy over operating temperature range. Gauge must be zeroed to achieve rated specification.
• Applies to all modules.
• Storage Temperature:
  
• Temperature Range: -40 to 75° C (-40 to 167° F)
• Enclosure:
  
• Dimensions: 1.4 x 1.4 x 3.0 in (35.5 x 35.5 x 76.2 mm)
• Weight:  0.51 lbs (231.0 g)

• (1) APM CPF Series Pressure Module
• (1) Instruction manual

Brochure/Datasheet

Instruction Manual

Download

Note: Prices are not binding at any time subject to change without prior notice